![]() ![]() Note: Turn down the pressure on the nailer or it will go right through the thin boards. I typically buy 4-5 tubes each time I need it for a project but depending on your space 3 tubes should be more than enough to generously apply and hold, especially if you are also reinforcing with a nail gun. The Liquid Nails brand has consistently held up for me. This worked very well with the ugly popcorn textured walls. In order to attach the panels I used panel glue with finishing nails for reinforcement. Note: If you have good quality walls you could choose to skip this step and do a more simple wainscoting design shown in the next step. If you can transport the 4 x 8 sheet whole, you can cut three pieces, two for the side walls and one that will go across the back. The 4 foot height was perfect for running from the bench to the shelf, and the 8 foot length was enough for me to cut 5 sections that would cover the interior walls of the closet space. As a result I chose a 4 x 8 board that had the lines running the long way. I needed to choose something that could be cut along the seams and covered with the grid framing that I planned on adding. ![]() I had originally wanted to go with a thin stripe option, but I was limited by the size of my car. There are quite a few options out there for bead board. Step One: Install Panels to the Back of the Drop Zone Here is the list of tools and materials that you will need to complete this project in your own home! Just take those doors off and start building your own drop zone with a floating bench! Keep reading to see how…the organizer in you will thank me. Or perhaps your home lacks this space, but you have a little nook or a low use closet. What’s nice is that a lot of homes have a spot where this takes place, but in our house I decided to make one upstairs in our office. Think shoes, jackets, backpacks, hats, keys, and so on. It is likely that naturally occurring spot in your home where your husband or kids like to throw their belongings. Here is how I finished creating an open concept closet space, with storage space and seating! What is a Drop Zone in a Home?įor those of you who may be unfamiliar with the term “Drop Zone”, here is a quick little explanation. Hopefully the new owner enjoys it as much as I would have.īuilding the floating bench was only half the project. Unfortunately it took the pressure of a pending home sale to finally get this project done. Both equally important tasks for a wife who also worked from home. I dreamed of sitting on this bench reading a book, or bothering my husband while he worked. I recommend hoping over there to read up on my floating bench tutorial, and then returning here for the second part of the project! Once the doors were off, I built a lovely floating bench. Last fall I made the decision to tear out the ugly brown hollow core doors in one of our upstairs bedrooms, that we were renovating, to make my husband a proper home office. This project can easily be used to convert any unused closet or wall space into an open concept mudroom or a drop zone with a floating bench, for all your day-to-day essentials. Please Note: This post May contain affiliate links.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |